The global thresher market size is calculated at USD 81.51 billion in 2025 and is forecasted to reach around USD 146.6 billion by 2034, accelerating at a CAGR of 6.74% from 2025 to 2034. The market sizing and forecasts are revenue-based (USD Million/Billion), with 2024 as the base year.
The global thresher market size accounted for USD 76.36 billion in 2024 and is predicted to increase from USD 81.51 billion in 2025 to approximately USD 146.6 billion by 2034, expanding at a CAGR of 6.74% from 2025 to 2034. The growth of the market is driven by the rising agricultural practices due to the high demand for food and advancements in agriculture technologies.
The integration of Artificial Intelligence into threshers creates smart machines that optimize threshing parameters like speed and settings based on real-time crop conditioning. This leads to higher efficiency and reduced grain loss. AI analyses data from the sensors and provides more intelligent insights, predicting potential failures. This enables proactive maintenance and minimizes downtime. AI tools, such as sensors, drones, and robotics, improve the management of crops, optimize resource use, and enhance overall farm efficiency. AI-based system allows for precision farming, where actions alike pest control, fertilization, and irrigation are targeted and minimize waste, leading to higher yields and decreased environmental harm.
Threshers are essential machines in agriculture that are used to remove seeds and thresh grain from the husks and stalks. They are applicable to separate the peas, soybeans, maize, wheat, and other small grains and seed crops from their straw and chaff. Threshers can be integrated with cutting-edge components and modern features, which support farming applications. The acceptance of threshers in various grain cultivation offers many benefits, from better efficiency and time savings to enhanced quality of grain and overall cost-effectiveness. Incorporating modern threshers in the agricultural process represents a technical advancement in farming.
Threshers significantly increase productivity and improve livelihoods for farmers. By using a thresher, farmers save significant time throughout the harvest season. This enables them to complete the threshing process more rapidly and move on to other important tasks on the farm. The adoption of threshers is growing due to their ability to make the inclusive agriculture process sustainable and less reliant on manual labor. They also lessen the physical strain on farmers. Threshers allow for the timely harvesting of rice, wheat, soybeans, and other grains, supporting farmers to avoid losses because of overripening or exposure to adverse environmental conditions.
| Report Coverage | Details |
| Market Size by 2034 | USD 146.6 Billion |
| Market Size in 2025 | USD 81.51 Billion |
| Market Size in 2024 | USD 76.36 Billion |
| Market Growth Rate from 2025 to 2034 | CAGR of 6.74% |
| Dominating Region | Asia Pacific |
| Fastest Growing Region | Europe |
| Base Year | 2024 |
| Forecast Period | 2025 to 2034 |
| Segments Covered | Product, Application, and Region |
| Regions Covered | North America, Europe, Asia-Pacific, Latin America, and Middle East & Africa |
Mechanization of Agriculture
There is a growing trend toward mechanizing agriculture practices, which is a major factor driving the growth of the thresher market. The adoption of threshers in agricultural practice increases overall productivity, efficiency, and farm results. By transforming from animal power to mechanical tools, farmers repurpose fodder land for food crop cultivation, optimizing land use. Mechanization enables the timely execution of farming operations, expands the cultivable area, and significantly boosts crop intensity and yield. The application of adaptable agricultural machinery also decreases labor dependency, enhancing farmers’ living standards and allowing them to reinvest in diversified income-generating activities like livestock or ancillary ventures. Additionally, increased power availability in agriculture allows for more efficient resource utilization and supports sustainable farming practices, increasing the demand for thresher solutions.
Operational Challenges and Maintenance Issues
High maintenance costs and operational challenges associated with threshing tools hamper the growth of the thresher market. Excessive use often leads to overheating, which causes engine damage and increased wear on critical components, thereby reducing machine lifespan. Improper adjustment during operation leads to important grain losses in the field, affecting overall harvesting efficiency. Furthermore, recurrent breakdowns or malfunctions because of continuous use cause operational downtime and lead to financial losses for farmers, posing a barrier to the broader adoption and expansion of threshing equipment.
Increasing Governmental Support for Smart Agriculture
The increasing governmental support for smart agriculture globally and domestically creates a significant opportunity in the thresher market. Governments of several nations are offering subsidies, grants, and incentives to promote the adoption of agricultural machinery, opening up new avenues for threshers. Public funding for long-term ecological monitoring and human-centric studies covering digital literacy, farm perceptions, and integration of traditional ecological knowledge further supports the adoption of smart agricultural practices. This multifaceted policy backing, aligned with climate resilience goals, accelerates technological diffusion and infrastructure development, thereby expanding the market potential for modern, efficient threshing equipment in the diverse agricultural landscapes.
The axial flow type segment held a considerable share of the thresher market in 2024, as it is used for various grain threshing, such as wheat, sorghum, paddy, gram, soybean, maize, pigeon pea, and sunflower. It consists of a cleaning system, a feeding chute, a threshing cylinder, and a concave cylinder. In axial flow, the crop is fed from one end, moves axially, and the straw is thrown out from the other end after finishing threshing of the crop. While threshing, the crop rotates three and a half times around the cylinder, and the grains get separated.
The wire-loop type segment is expected to expand at a significant rate in the upcoming period. The wire-loop type threshing tools are advantageous because of low grain loss. In a wire-loop type threshing tool, separation of grains occurs primarily because of the impact and combing actions rather than the rubbing action. It is primarily applicable for threshing rice crops. It has better threshing efficiency and facilitates the smooth movement of crop straw. The rising focus on reducing waste is likely to drive segmental growth.
The wheat segment dominated the thresher market in 2024 as it is a highly produced and consumed crop worldwide. Thresher supports growing production to cater to increasing demands and also reduces the dependence on labor. The thresher has the characteristics of compact structure, beautiful appearance, and reliable operation. Characterized by a huge production rate, better threshing performance, and little grain loss, it helps farmers reduce waste and increase yields. This thresher has combined work with a separate sieve so that grain, wheat bran, and wheat straw are separated and cleaned at the same time.
The rice segment is projected to grow at a significant rate in the coming years. Threshers remove or separate the rice grains from the straw or panicle. It comes in small and large capacities. As compared to manual threshing, it has a higher capacity and saves postharvest losses. Immediate threshing lowers the contact of the crop to insects, rodents, birds, disease, and molds.
Asia Pacific dominated the thresher market with the largest share in 2024. This is mainly due to its vast agricultural land. The adoption of agricultural technologies has increased rapidly in the last few years. There is a strong emphasis on agricultural mechanization, creating the need for threshers. Governments around the region have made significant steps to promote the use of advanced machinery. The region is likely to maintain its growth trajectory in the coming years. The rising focus on enhancing farm productivity and alleviating poverty further supports regional market growth. As the demand for food continues to rise due to population growth, the need for sustainable and efficient agricultural practices has become increasingly urgent, driving the growth of the market.
India is a major player in the market in Asia Pacific. The rising demand for sustainable agricultural practices to reduce waste is one of the key factors driving the growth of the market. There is a strong focus on improving farm productivity and minimizing environmental impact, which is boosting the adoption of autonomous machinery, such as multifunctional robots, driverless tractors, and energy-efficient threshers. With the emergence of autonomous farm equipment, the agriculture sector in India is expanding by revolutionizing traditional farming practices.
China plays a major role in the market. The rising demand for modern agricultural machinery and rising government policies to promote the use of machinery and improve productivity are likely to drive the growth of the market. The increasing emphasis on sustainable agricultural practices influences the market.
Europe is projected to witness a rapid growth in the market throughout the forecast period. The region has a large agriculture sector. The rising agriculture practices are creating the need for threshers. Governments around the region have imposed regulations to reduce agricultural waste. This has prompted the need for advanced threshers. Moreover, the rising focus on precision and sustainable farming practices is expected to support regional market growth.
North America is considered to be a significantly growing area. The growth of the thresher market in the region is attributed to the highly mechanized agriculture. Farmers in the region are using advanced machinery for planting, cultivating, and harvesting crops. Moreover, there is a high adoption rate of automated machinery to boost farm productivity and reduce waste. The region is at the forefront of technological innovations, leading to the development of cutting-edge threshers. North America employs modern technology and machinery in farming, contributing to the growth of the market.
In the U.S., agriculture is more developed because of large farm fields. Farmers in the country use high-tech machines and modern methods in agriculture. The abundance of grassland and the availability of water make agriculture easier.
By Product
By Application
By Region
For inquiries regarding discounts, bulk purchases, or customization requests, please contact us at sales@precedenceresearch.com
No cookie-cutter, only authentic analysis – take the 1st step to become a Precedence Research client
Get a Sample
Schedule a Meeting
Get a Sample
Table Of Content